BADGER - Carpenter Set (Short)

Designed with carpenters in mind but offering ample storage options for a variety of trades, this medium-sized tool belt is suitable for both indoor and outdoor work. It is compact enough to allow for easy movement during indoor projects, yet spacious enough to carry a large quantity of tools and fasteners when the job requires it.

This is the first complete set designed by Badger, which served as the foundation for the development of all the brand’s other sets. For many users, it is the ideal everyday set.

This set includes a contoured belt with a COBRA® metal buckle, the Carpenter tool pouch on the dominant side, and the Carpenter fastener pouch on the non-dominant side.

---

Carpenter Tool Bag

• Tape measure pouch

• 5 tool compartments in the main pocket: three on the inside back and two on the inside front

• Single lower exterior pocket with tool compartment

• Rear loop for tool

• Front compartment for pencils and a utility knife, featuring three small slots and a deep pocket

• Total length: approximately 14 inches

• Hammer holder included

---

Carpenter's Tool Bag

• Tape measure pouch with 4 internal elastic compartments, each 1 inch wide

• Compartment for the Speed Square in the main pocket, with a large tool slot below

• Lower pocket for fasteners with a slot

• Two front pockets for tools

• Two stacked rear tool slots

• Reinforced bracket for the lever under the bag

• Total length: approximately 14 inches

---

Like all Badger bags, the bottoms of the main compartments and attachment pockets are reinforced with a tactical webbing strap made in the United States to increase resistance to punctures and abrasion.

 

General maintenance

• Sweep up dust and debris from the construction site every day.

• Wipe with a damp cloth as needed, then let it air dry.

• Shake the inside occasionally to remove any debris.

• Avoid prolonged exposure to the sun and harsh chemical cleaners.

• For stubborn stains, use water and mild soap.

• Store in a cool, dry place when the equipment is not in use.

Repairing scuffs or small tears

The nylon components of tool bags—such as straps or edging —are very durable, but not indestructible. If you notice any scuffs or small tears, it’s important to take action quickly before the damage gets worse.

Detecting and repairing damage early can prevent it from becoming irreparable, especially in high-stress areas such as seams, corners, or straps.

• Use nylon repair tape or a fabric patch (such as Tenacious Tape or Gear Aid) to seal the area.

• If that doesn't work, a small amount of super glue can do the trick for very small areas.

• Make sure the surface is clean and dry before applying the patch.